The System M3X / M4X CNC Control
The System M3X Control was designed from the ground up with the machine operator in mind. The ease of use and reliability of design will reward you with years of profitable use.
With our Conversational Programming System (Also available as a standalone version.) The casual machine operator will be up and running right away. By using easy fill in field machine events you can make a single cut or a complete part without G-Code experience.
For the more experienced machinist and large production facilities you'll appreciate the full control that comes with the G-Code library support and the no-nonsense control panel design. The optional 4th axis synchronous rotary table can be used for simple indexing to complex contour work, and at a price that doesn't buy the software alone with most of the other guys.
Specifications Control Programming
Automatically runs EIA RS-274D Standard G & M Code Programs
FANUC® Compatible Programming
Complete Program Edit Capability
MDI Operation modes: Auto, Single Block, Jog, Home
Full Canned Cycle Support G81-G89
Sub Program Support M98, M99
Absolute & Incremental Programming G90, G91
Scaling G50, G51
CW/CCW Circular Interpolation G02, G03
Fixture Offsets G54-G59
Tool Length Offsets G43, G44, G49
USB Flash Drive
15" Touch Screen
64 bit Microprocessor
Windows 10 Operating System
View Program While in Run Mode
Graphic Toolpath Verification
Remote Electronic Handwheel Jog
Incremental Jog (.0001" to 100")
Minimum Programmable Increment .0001"
Simultaneous 3-Axis Linear Interpolation up to 200 IPM. G01
Helical Interpolation up to 200 IPM. G02/G03
Rapid Positioning X, Y, Z up to 250 IPM G00
Mechanical Overtravel Limit, and Zero Reference Switches
Programmable software limits.